Tag Archives: chain

China manufacturer Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo Motor for Micro Electric Pump Fan Chain Grinder vacuum pump design

Product Description

 

Product Description

 

model Number of poles Phase Rated voltage Rated speed Continuous locked-rotor torque Rated torque Rated power Peak torque
Units     VDC RPM N.m N.m W N.m
42BYA075B030C-02 4 3 24 3000 0.192 0.16 50 0.48

 

model Peak current Torque constant Back EMF Motor length Motor length voltage range Range of rotation weight
Units A Nm/A V/KRPM g.cMoment of inertia mm VDC RPM Kg
42BYA075B030C-02 9.6 0.05 3.947 14.6 134 24~48 1000~3000 1.0 

Product Parameters

Quiet stable and reliable for long life operation

1.Voltage: 24 VDC
2.Number of phases: 3
3.Number of levels: 4
4.Line-to-line resistance: 1.45±10%ohms
5.Line-to-line inductance: 1.27±20%mH
6.Rated current: 3.2A
7.Rated power: 50W
8.No-load speed: 4300 rpm
9.Insulation class: B
10.Reduction ratio: 1:58.22
11.Output torque: 7.5 N.m
12.Output speed: 51.5 rpm
13.We can design the special voltage and shaft and so on

Jintian Imp. & Exp Co. Ltd opened in 2008 to facilitate international trade between China and the rest of the world. The young firm grew quickly, gaining a reputation for integrity, efficiency and astute knowledge of local market.

Throughout its 10 more years history, CHINAMFG has sought to connect customers with opportunities. While that purpose has remained unchanged, CHINAMFG has succeeded by positioning itself where the growth is and by aligning itself to the major economic trends of the time.

After being funded in ZheJiang , China to facilitate local and international trade, CHINAMFG expanded rapidly to capture the increasing flow of commerce between Asia, Europe and North America. Since then, CHINAMFG has continued to grow in line with changing trade patterns and developing markets, pioneering modern international trade practices in many countries. Built over 10 years, this global network is highly distinctive, difficult to replicate and ideally positioned for the world’s top trade corridors.

Our ability to connect customers remains absolutely central to the company’s strategy today, which aims to establish CHINAMFG as the world”s leading international trade company. Above all, we remain dedicated to the purpose that CHINAMFG was founded to serve: Connecting customers to opportunities, enabling businesses to CHINAMFG and economies to prosper, and helping people to fulfill their hopes and dreams.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: High Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Protection Type
Number of Poles: 8
Samples:
US$ 162/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

brushless motor

Are there advancements or emerging technologies in micro gear motor development?

Yes, there are several advancements and emerging technologies in micro gear motor development that are shaping the future of this field. Here are some notable examples:

  • Miniaturization: Advancements in manufacturing techniques and materials have enabled the miniaturization of micro gear motors. Today, micro gear motors are becoming smaller while still maintaining high torque and precision. This trend opens up new possibilities for their integration into compact devices and applications where space is limited.
  • High-Efficiency Motors: There is a growing demand for micro gear motors with improved energy efficiency. Manufacturers are developing motor designs and control algorithms that minimize power losses, reduce friction, and optimize the motor’s efficiency across various operating conditions. High-efficiency motors contribute to longer battery life, reduced power consumption, and improved overall system performance.
  • Smart and Connected Motors: With the rise of the Internet of Things (IoT) and smart devices, micro gear motors are being equipped with connectivity features and integrated sensors. These smart and connected motors can communicate with other devices, gather data, and enable advanced control and monitoring capabilities. This integration enhances automation, allows for predictive maintenance, and enables intelligent motor operation in various applications.
  • Magnetic Gear Systems: Traditional mechanical gear systems in micro gear motors can introduce noise, backlash, and wear. Magnetic gear systems offer an alternative approach by utilizing magnetic forces to transmit torque. These systems eliminate the need for physical contact between gears, resulting in reduced friction, improved efficiency, and quieter operation. Magnetic gear systems are being explored and developed for micro gear motor applications where precision and low noise levels are critical.
  • Advanced Materials: The development of new materials, such as high-strength composites and advanced engineering plastics, is driving improvements in micro gear motor performance. These materials offer enhanced mechanical properties, reduced weight, improved wear resistance, and increased durability. The use of advanced materials in micro gear motors contributes to higher torque density, improved efficiency, and extended lifespan.
  • Nanotechnology: Nanotechnology is being explored for its potential impact on micro gear motor development. Nanoscale structures and materials can offer unique properties, such as improved lubrication, reduced friction, and enhanced thermal conductivity. Researchers are investigating the integration of nanomaterials and nanoscale manufacturing techniques to further enhance the performance and reliability of micro gear motors.

These advancements and emerging technologies in micro gear motor development are driving innovation and opening up new possibilities in various industries, including robotics, automation, medical devices, and consumer electronics. As research and development in this field continue, we can expect further improvements in efficiency, miniaturization, connectivity, and overall performance of micro gear motors.

brushless motor

Can you provide examples of innovative uses of micro gear motors in modern technology?

Micro gear motors have found innovative applications across various modern technologies. Here are some examples:

  • Drones: Micro gear motors are commonly used in drones to drive the propellers and control the flight. Their compact size, lightweight design, and precise control capabilities make them ideal for achieving stable and agile flight maneuvers.
  • Robotics: Micro gear motors play a crucial role in robotics, powering the joints and actuators of robotic arms, grippers, and humanoid robots. Their precise control, compact form factor, and high torque-to-size ratio enable robots to perform delicate and precise manipulations in industrial automation, medical procedures, and research applications.
  • Automotive Systems: Micro gear motors are used in various automotive systems, such as power windows, door locks, and seat adjustments. Their small size and high torque allow for efficient and reliable operation of these mechanisms within the limited space available in vehicles.
  • Medical Devices: Micro gear motors are utilized in medical devices and equipment, including surgical robots, prosthetics, insulin pumps, and lab automation systems. Their precise control, compact size, and low power consumption make them suitable for applications requiring fine movements, accurate dosing, and miniaturization.
  • Consumer Electronics: Micro gear motors are incorporated into numerous consumer electronic devices. They can be found in cameras for lens movement and autofocus, wearable devices for haptic feedback and vibration, and home appliances for precise control of valves, fans, and robotic components.
  • Smart Home Systems: Micro gear motors are employed in smart home systems to control various functions, such as motorized curtains, blinds, and awnings. Their precise control, quiet operation, and compatibility with automation systems allow for convenient and customizable control of these home features.

These examples represent just a few of the many innovative uses of micro gear motors in modern technology. Their versatility, precision, and compact design make them valuable components in a wide range of applications, contributing to advancements in automation, robotics, electronics, and beyond.

brushless motor

What types of gears are typically employed in micro gear motors for efficient power transmission?

Micro gear motors utilize various types of gears to achieve efficient power transmission. Here are some commonly employed gear types in micro gear motors:

1. Spur Gears:

Spur gears are the most basic and commonly used gears in micro gear motors. They have straight teeth and are mounted on parallel shafts. Spur gears provide efficient power transmission with low noise and high efficiency. They are suitable for applications that require high-speed rotation and moderate torque requirements.

2. Helical Gears:

Helical gears are similar to spur gears but have angled teeth. The angled teeth allow for smoother and quieter operation compared to spur gears. Helical gears provide higher torque transmission capabilities and are commonly used in micro gear motors where reducing noise and vibration is important, such as in precision instruments or small appliances.

3. Planetary Gears:

Planetary gears, also known as epicyclic gears, are compact gear systems that consist of a central gear (sun gear), multiple surrounding gears (planet gears), and an outer ring gear (ring gear). Planetary gears offer high torque transmission capabilities in a compact design. They are commonly used in micro gear motors where a high gear ratio and torque multiplication are required, such as in robotics or automation systems.

4. Worm Gears:

Worm gears consist of a worm (a screw-like gear) and a mating gear called a worm wheel. Worm gears provide a high gear reduction ratio and are suitable for applications that require high torque output and low-speed rotation. They are commonly used in micro gear motors for applications such as valve actuators, conveyor systems, or precision positioning devices.

5. Bevel Gears:

Bevel gears have teeth that are cut on conical surfaces and are used to transmit power between intersecting shafts. They are commonly employed in micro gear motors that require changes in direction or angle of power transmission. Bevel gears provide efficient power transfer and can accommodate a wide range of speed and torque requirements.

6. Hypoid Gears:

Hypoid gears are similar to bevel gears but have offset axes. They are used in micro gear motors that require high torque transmission at right angles. Hypoid gears offer efficient power transmission with reduced noise and vibration, making them suitable for applications that require compact and quiet operation.

7. Rack and Pinion:

Rack and pinion gears consist of a linear gear (rack) meshing with a rotational gear (pinion). They are commonly used in micro gear motors for linear motion applications, such as in CNC machines, 3D printers, or small-scale automation systems. Rack and pinion gears provide efficient and precise linear motion control.

These are some of the common types of gears employed in micro gear motors for efficient power transmission. The choice of gear type depends on the specific requirements of the application, including torque, speed, noise level, and space constraints.

China manufacturer Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo Motor for Micro Electric Pump Fan Chain Grinder   vacuum pump design		China manufacturer Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo Motor for Micro Electric Pump Fan Chain Grinder   vacuum pump design
editor by CX 2024-04-10

China OEM 130mm 12V 24V 48V Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo BLDC Motor for Pump Fan Chain Grinder vacuum pump booster

Product Description

Quiet stable and reliable for long life operation

1.Diameters: 57mm
2.Lengths: 56mm;76mm;96mm
3.Continuous torques: 0.11Nm;0.22Nm;0.32Nm
4.Power: 46W;92W;134W
5.Speeds up to 4000rpm;4000rpm;4000rpm
6.Environmental conditions: -10~+40°C
7.Number of poles/phase:4/3
8.Mangnet material:Bonded NdFeB
9.Insulation class:B
10.Optional: electronic drivers, encoders and gearheads, as well as Hall effect resolver and sensorless feedback
11.We can design the special voltage and shaft and so on

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Medical Equpiments
Operating Speed: Constant Speed
Excitation Mode: Compound
Function: Driving
Number of Poles: 8
Structure and Working Principle: Brushless
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

servo motor

Are there common issues or challenges associated with servo motor systems, and how can they be addressed?

Servo motor systems are widely used in various applications, but they can encounter common issues or challenges that affect their performance and reliability. Let’s explore some of these issues and discuss potential solutions:

1. Positioning and Tracking Errors:

One common challenge in servo motor systems is positioning and tracking errors. These errors can occur due to factors such as mechanical backlash, encoder resolution limitations, or disturbances in the system. To address this issue, careful calibration and tuning of the servo control system are necessary. This includes adjusting feedback gains, implementing feedback filtering techniques, and utilizing advanced control algorithms to improve the system’s accuracy and minimize errors. Additionally, employing high-resolution encoders and backlash compensation mechanisms can help enhance the positioning and tracking performance.

2. Vibration and Resonance:

Vibration and resonance can impact the performance of servo motor systems, leading to reduced accuracy and stability. These issues can arise from mechanical resonances within the system or external disturbances. To mitigate vibration and resonance problems, it is crucial to analyze the system’s dynamics and identify critical resonant frequencies. Implementing vibration dampening techniques such as mechanical isolation, using vibration-absorbing materials, or employing active vibration control methods can help minimize the effect of vibrations and improve the system’s performance.

3. Overheating and Thermal Management:

Servo motors can generate heat during operation, and inadequate thermal management can lead to overheating and potential performance degradation. To address this issue, proper cooling and thermal management techniques should be employed. This may involve using heat sinks, fans, or liquid cooling systems to dissipate heat efficiently. Ensuring adequate ventilation and airflow around the motor and avoiding excessive current or overloading can also help prevent overheating. Monitoring the motor’s temperature and implementing temperature protection mechanisms can further safeguard the motor from thermal damage.

4. Electrical Noise and Interference:

Electrical noise and interference can affect the performance and reliability of servo motor systems. These issues can arise from electromagnetic interference (EMI) or radio frequency interference (RFI) from nearby equipment or electrical sources. To mitigate electrical noise, proper shielding and grounding techniques should be employed. Using shielded cables, ferrite cores, and grounding the motor and control system can help minimize the impact of noise and interference. Additionally, employing filtering techniques and surge protection devices can further improve system robustness against electrical disturbances.

5. System Integration and Compatibility:

Integrating a servo motor system into a larger control system or automation setup can present challenges in terms of compatibility and communication. Ensuring proper compatibility between the servo motor and the control system is crucial. This involves selecting appropriate communication protocols, such as EtherCAT or Modbus, and ensuring compatibility with the control signals and interfaces. Employing standardized communication interfaces and protocols can facilitate seamless integration and interoperability. Additionally, thorough testing and verification of the system’s compatibility before deployment can help identify and address any integration issues.

6. Maintenance and Service:

Maintenance and service requirements are important considerations for servo motor systems. Regular maintenance, including lubrication, inspection, and cleaning, can help prevent issues related to wear and tear. Following manufacturer-recommended maintenance schedules and procedures is essential to ensure the longevity and optimal performance of the motor. In case of any malfunctions or failures, having access to technical support from the manufacturer or trained service personnel can help diagnose and address problems effectively.

By being aware of these common issues and challenges associated with servo motor systems and implementing appropriate solutions, it is possible to enhance the performance, reliability, and lifespan of the servo motor system. Regular monitoring, proactive maintenance, and continuous improvement can contribute to optimizing the overall operation and efficiency of the system.

servo motor

What factors should be considered when selecting a servo motor for a specific application?

When selecting a servo motor for a specific application, several factors need to be considered. These factors help ensure that the chosen servo motor meets the requirements and performs optimally in the intended application. Here are some key factors to consider:

1. Torque and Power Requirements:

One of the primary considerations is the torque and power requirements of the application. The servo motor should be able to generate sufficient torque to handle the load and overcome any resistance or friction in the system. Additionally, the power rating of the motor should match the power supply available in the application. It is essential to evaluate the torque-speed characteristics of the servo motor to ensure it can deliver the required performance.

2. Speed and Acceleration:

The required speed and acceleration capabilities of the servo motor should align with the application’s needs. Different applications have varying speed and acceleration requirements, and the servo motor should be able to meet these demands. It is crucial to consider both the maximum speed that the motor can achieve and the time it takes to accelerate or decelerate to specific speeds. Evaluating the servo motor’s speed-torque characteristics and acceleration capabilities is necessary for selecting the right motor.

3. Positioning Accuracy and Repeatability:

The desired positioning accuracy and repeatability of the application play a significant role in servo motor selection. If precise positioning is crucial, a servo motor with high accuracy and low positioning errors should be chosen. The feedback mechanism, such as encoders or resolvers, should provide the required resolution to achieve the desired accuracy. Repeatability, the ability to consistently reach the same position, should also be considered, especially in applications where repetitive movements are necessary.

4. Environmental Conditions:

The environmental conditions in which the servo motor will operate should be taken into account. Factors such as temperature extremes, humidity, dust, and vibration can affect the motor’s performance and lifespan. In harsh environments, it may be necessary to choose a servo motor with appropriate protection ratings, such as IP (Ingress Protection) ratings, to ensure reliable operation and longevity.

5. Control System Compatibility:

The compatibility of the servo motor with the control system used in the application is crucial. The motor should be compatible with the control signals and communication protocols employed in the system. This includes considerations such as voltage compatibility, control signal types (analog, digital, pulse), and communication interfaces (such as Ethernet, CAN, or Modbus). Ensuring compatibility will facilitate seamless integration and efficient control of the servo motor within the application.

6. Size and Weight Constraints:

The physical size and weight limitations of the application should be considered when selecting a servo motor. The motor’s dimensions should fit within the available space, and its weight should not exceed the application’s weight capacity. Compact and lightweight servo motors may be preferred in applications where space is limited or weight is a critical factor.

7. Cost Considerations:

The cost of the servo motor and its overall value for the application should be evaluated. It is essential to consider the initial purchase cost as well as the long-term maintenance and operational costs. While cost is a factor, it should not be the sole determining factor, as compromising on quality or performance may lead to suboptimal results.

By considering these factors, one can make an informed decision when selecting a servo motor for a specific application. It is recommended to consult with manufacturers or experts in the field to ensure the chosen servo motor meets the application’s requirements and provides reliable and efficient performance.

servo motor

What are the key advantages of using servo motors in industrial applications?

Servo motors offer several key advantages that make them highly beneficial for a wide range of industrial applications. Here are some of the main advantages of using servo motors:

1. Precise Positioning:

Servo motors excel at precise positioning control. They can accurately move to specific angles or positions with high repeatability. This level of precision is crucial in applications where accurate and consistent positioning is required, such as robotics, CNC machining, and assembly lines.

2. High Torque at Various Speeds:

Servo motors are designed to deliver high torque output across a range of speeds. They can generate significant torque even at low speeds, enabling efficient operation in applications that require both high torque and precise control, such as lifting heavy loads or performing intricate movements.

3. Fast Response Times:

Servo motors have fast response times, meaning they can quickly accelerate, decelerate, and change direction in response to control signals. This responsiveness is essential in applications where rapid and dynamic motion control is needed, such as industrial automation, robotics, and production line equipment.

4. Closed-Loop Control:

Servo motors operate in a closed-loop control system, where feedback from position sensors is continuously used to adjust the motor’s behavior. This feedback control mechanism enables accurate tracking of the desired position and compensates for any disturbances or variations that may occur during operation. It enhances the motor’s accuracy, stability, and performance.

5. Wide Range of Sizes and Power Ratings:

Servo motors are available in a wide range of sizes and power ratings, making them suitable for diverse industrial applications. Whether it’s a small motor for precision tasks or a large motor for heavy-duty operations, there are servo motor options to meet various requirements.

6. Energy Efficiency:

Servo motors are designed to be energy-efficient. They typically have high power density, which means they can deliver a significant amount of torque per unit of size and weight. This efficiency helps reduce power consumption, lowers operating costs, and contributes to a greener and more sustainable industrial environment.

7. Flexibility and Adaptability:

Due to their versatility, servo motors can be easily integrated into different systems and applications. They can be combined with various control systems, sensors, and communication protocols to provide seamless integration and compatibility with existing industrial setups. This flexibility allows for customized and scalable solutions tailored to specific industrial requirements.

8. Durability and Reliability:

Servo motors are known for their durability and reliability, even in demanding industrial environments. They are built to withstand harsh conditions such as high temperatures, vibrations, and dust. This robust construction ensures long-term operation and minimizes downtime, contributing to increased productivity and reduced maintenance costs.

In summary, the key advantages of using servo motors in industrial applications include precise positioning, high torque at various speeds, fast response times, closed-loop control for accuracy and stability, a wide range of sizes and power ratings, energy efficiency, flexibility, and durability. These advantages make servo motors highly valuable for industries that require precise motion control, such as robotics, manufacturing, automation, CNC machining, and many others.

China OEM 130mm 12V 24V 48V Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo BLDC Motor for Pump Fan Chain Grinder   vacuum pump booster	China OEM 130mm 12V 24V 48V Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo BLDC Motor for Pump Fan Chain Grinder   vacuum pump booster
editor by CX 2023-11-18

China best 130mm 12V 24V 48V Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo BLDC Motor for Pump Fan Chain Grinder wholesaler

Product Description

Quiet stable and reliable for long life operation

1.Diameters: 57mm
2.Lengths: 56mm;76mm;96mm
3.Continuous torques: 0.11Nm;0.22Nm;0.32Nm
4.Power: 46W;92W;134W
5.Speeds up to 4000rpm;4000rpm;4000rpm
6.Environmental conditions: -10~+40°C
7.Number of poles/phase:4/3
8.Mangnet material:Bonded NdFeB
9.Insulation class:B
10.Optional: electronic drivers, encoders and gearheads, as well as Hall effect resolver and sensorless feedback
11.We can design the special voltage and shaft and so on

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Medical Equpiments
Operating Speed: Constant Speed
Excitation Mode: Compound
Function: Driving
Number of Poles: 8
Structure and Working Principle: Brushless
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

gear motor

Are gear motors suitable for both heavy-duty industrial applications and smaller-scale uses?

Yes, gear motors are suitable for both heavy-duty industrial applications and smaller-scale uses. Their versatility and ability to provide torque multiplication make them valuable in a wide range of applications. Here’s a detailed explanation of why gear motors are suitable for both types of applications:

1. Heavy-Duty Industrial Applications:

Gear motors are commonly used in heavy-duty industrial applications due to their robustness and ability to handle high loads. Here are the reasons why they are suitable for such applications:

  • Torque Multiplication: Gear motors are designed to provide high torque output, making them ideal for applications that require substantial force to move or operate heavy machinery, conveyors, or equipment.
  • Load Handling: Industrial settings often involve heavy loads and demanding operating conditions. Gear motors, with their ability to handle high loads, are well-suited for tasks such as lifting, pulling, pushing, or driving heavy materials or equipment.
  • Durability: Heavy-duty industrial applications require components that can withstand harsh environments, frequent use, and demanding operating conditions. Gear motors are typically constructed with durable materials and designed to withstand heavy vibrations, shock loads, and temperature variations.
  • Speed Reduction: Many industrial processes require the reduction of motor speed to achieve the desired output speed. Gear motors offer precise speed reduction capabilities through gear ratios, allowing for optimal control and operation of machinery and equipment.

2. Smaller-Scale Uses:

While gear motors excel in heavy-duty industrial applications, they are also suitable for smaller-scale uses across various industries and applications. Here’s why gear motors are well-suited for smaller-scale uses:

  • Compact Size: Gear motors are available in compact sizes, making them suitable for applications with limited space or small-scale machinery, devices, or appliances.
  • Torque and Power Control: Even in smaller-scale applications, there may be a need for torque multiplication or precise power control. Gear motors can provide the necessary torque and power output for tasks such as precise positioning, controlling speed, or driving small loads.
  • Versatility: Gear motors come in various configurations, such as parallel shaft, planetary, or worm gear designs, offering flexibility to match specific requirements. They can be adapted to different applications, including robotics, medical devices, automotive systems, home automation, and more.
  • Efficiency: Gear motors are designed to be efficient, converting the electrical input power into mechanical output power with minimal losses. This efficiency is advantageous for smaller-scale applications where energy conservation and battery life are critical.

Overall, gear motors are highly versatile and suitable for both heavy-duty industrial applications and smaller-scale uses. Their ability to provide torque multiplication, handle high loads, offer precise speed control, and accommodate various sizes and configurations makes them a reliable choice in a wide range of applications. Whether it’s powering large industrial machinery or driving small-scale automation systems, gear motors provide the necessary torque, control, and durability required for efficient operation.

gear motor

How does the voltage and power rating of a gear motor impact its suitability for different tasks?

The voltage and power rating of a gear motor are important factors that influence its suitability for different tasks. These specifications determine the motor’s electrical characteristics and its ability to perform specific tasks effectively. Here’s a detailed explanation of how voltage and power rating impact the suitability of a gear motor for different tasks:

1. Voltage Rating:

The voltage rating of a gear motor refers to the electrical voltage it requires to operate optimally. Here’s how the voltage rating affects suitability:

  • Compatibility with Power Supply: The gear motor’s voltage rating must match the available power supply. Using a motor with a voltage rating that is too high or too low for the power supply can lead to improper operation or damage to the motor.
  • Electrical Safety: Adhering to the specified voltage rating ensures electrical safety. Using a motor with a higher voltage rating than recommended can pose safety hazards, while using a motor with a lower voltage rating may result in inadequate performance.
  • Application Flexibility: Different tasks or applications may have specific voltage requirements. For example, low-voltage gear motors are commonly used in battery-powered devices or applications with low-power requirements, while high-voltage gear motors are suitable for industrial applications or tasks that require higher power output.

2. Power Rating:

The power rating of a gear motor indicates its ability to deliver mechanical power. It is typically specified in units of watts (W) or horsepower (HP). The power rating impacts the suitability of a gear motor in the following ways:

  • Load Capacity: The power rating determines the maximum load that a gear motor can handle. Motors with higher power ratings are capable of driving heavier loads or handling tasks that require more torque.
  • Speed and Torque: The power rating affects the motor’s speed and torque characteristics. Motors with higher power ratings generally offer higher speeds and greater torque output, making them suitable for applications that require faster operation or the ability to overcome higher resistance or loads.
  • Efficiency and Energy Consumption: The power rating is related to the motor’s efficiency and energy consumption. Higher power-rated motors may be more efficient, resulting in lower energy losses and reduced operating costs over time.
  • Thermal Considerations: Motors with higher power ratings may generate more heat during operation. It is crucial to consider the motor’s power rating in relation to its thermal management capabilities to prevent overheating and ensure long-term reliability.

Considerations for Task Suitability:

When selecting a gear motor for a specific task, it is important to consider the following factors in relation to the voltage and power rating:

  • Required Torque and Load: Assess the torque and load requirements of the task to ensure that the gear motor’s power rating is sufficient to handle the expected load without being overloaded.
  • Speed and Precision: Consider the desired speed and precision of the task. Motors with higher power ratings generally offer better speed control and accuracy.
  • Power Supply Availability: Evaluate the availability and compatibility of the power supply with the gear motor’s voltage rating. Ensure that the power supply can provide the required voltage for the motor’s optimal operation.
  • Environmental Factors: Consider any specific environmental factors, such as temperature or humidity, that may impact the gear motor’s performance. Ensure that the motor’s voltage and power ratings are suitable for the intended operating conditions.

In summary, the voltage and power rating of a gear motor have significant implications for its suitability in different tasks. The voltage rating determines compatibility with the power supply and ensures electrical safety, while the power rating influences load capacity, speed, torque, efficiency, and thermal considerations. When choosing a gear motor, it is crucial to carefully evaluate the task requirements and consider the voltage and power rating in relation to factors such as torque, speed, power supply availability, and environmental conditions.

gear motor

In which industries are gear motors commonly used, and what are their primary applications?

Gear motors find widespread use in various industries due to their versatility, reliability, and ability to provide controlled mechanical power. They are employed in a wide range of applications that require precise power transmission and speed control. Here’s a detailed explanation of the industries where gear motors are commonly used and their primary applications:

1. Robotics and Automation:

Gear motors play a crucial role in robotics and automation industries. They are used in robotic arms, conveyor systems, automated assembly lines, and other robotic applications. Gear motors provide the required torque, speed control, and directional control necessary for the precise movements and operations of robots. They enable accurate positioning, gripping, and manipulation tasks in industrial and commercial automation settings.

2. Automotive Industry:

The automotive industry extensively utilizes gear motors in various applications. They are used in power windows, windshield wipers, HVAC systems, seat adjustment mechanisms, and many other automotive components. Gear motors provide the necessary torque and speed control for these systems, enabling smooth and efficient operation. Additionally, gear motors are also utilized in electric and hybrid vehicles for powertrain applications.

3. Manufacturing and Machinery:

Gear motors find wide application in the manufacturing and machinery sector. They are used in conveyor belts, packaging equipment, material handling systems, industrial mixers, and other machinery. Gear motors provide reliable power transmission, precise speed control, and torque amplification, ensuring efficient and synchronized operation of various manufacturing processes and machinery.

4. HVAC and Building Systems:

In heating, ventilation, and air conditioning (HVAC) systems, gear motors are commonly used in damper actuators, control valves, and fan systems. They enable precise control of airflow, temperature, and pressure, contributing to energy efficiency and comfort in buildings. Gear motors also find applications in automatic doors, blinds, and gate systems, providing reliable and controlled movement.

5. Marine and Offshore Industry:

Gear motors are extensively used in the marine and offshore industry, particularly in propulsion systems, winches, and cranes. They provide the required torque and speed control for various marine operations, including steering, anchor handling, cargo handling, and positioning equipment. Gear motors in marine applications are designed to withstand harsh environments and provide reliable performance under demanding conditions.

6. Renewable Energy Systems:

The renewable energy sector, including wind turbines and solar tracking systems, relies on gear motors for efficient power generation. Gear motors are used to adjust the rotor angle and position in wind turbines, optimizing their performance in different wind conditions. In solar tracking systems, gear motors enable the precise movement and alignment of solar panels to maximize sunlight capture and energy production.

7. Medical and Healthcare:

Gear motors have applications in the medical and healthcare industry, including in medical equipment, laboratory devices, and patient care systems. They are used in devices such as infusion pumps, ventilators, surgical robots, and diagnostic equipment. Gear motors provide precise control and smooth operation, ensuring accurate dosing, controlled movements, and reliable functionality in critical medical applications.

These are just a few examples of the industries where gear motors are commonly used. Their versatility and ability to provide controlled mechanical power make them indispensable in numerous applications requiring torque amplification, speed control, directional control, and load distribution. The reliable and efficient power transmission offered by gear motors contributes to the smooth and precise operation of machinery and systems in various industries.

China best 130mm 12V 24V 48V Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo BLDC Motor for Pump Fan Chain Grinder   wholesaler China best 130mm 12V 24V 48V Variable Speed High Power Electric Car Brushless DC Planetary Gear Servo BLDC Motor for Pump Fan Chain Grinder   wholesaler
editor by CX 2023-10-20

China High Power Electric Car Brushless DC Planetary Gear Servo Motor for Long Life High Power Pump Fan Chain Grinder brushless motor

Product Description

 

Item Description

 

model Number of poles Section Rated voltage Rated speed Continuous locked-rotor torque Rated torque Rated energy Peak torque
Units     VDC RPM N.m N.m W N.m
42BYA075B030C-02 4 3 24 3000 .192 .16 fifty .48

 

model Peak recent Torque consistent Back again EMF Motor duration Motor duration voltage assortment Selection of rotation bodyweight
Models A Nm/A V/KRPM g.cMoment of inertia mm VDC RPM Kg
42BYA075B030C-02 9.6 .05 3.947 fourteen.six 134 24~forty eight 1000~3000 one.0 

Product Parameters

Quiet steady and reliable for prolonged daily life operation

1.Voltage: 24 VDC
two.Number of phases: three
three.Variety of stages: 4
four.Line-to-line resistance: 1.45±10%ohms
5.Line-to-line inductance: 1.27±20%mH
6.Rated existing: 3.2A
seven.Rated power: 50W
eight.No-load velocity: 4300 rpm
nine.Insulation course: B
10.Reduction ratio: 1:58.22
eleven.Output torque: 7.5 N.m
12.Output pace: 51.5 rpm
13.We can design the particular voltage and shaft and so on


/ Piece
|
50 Pieces

(Min. Order)

###

Application: Industrial
Speed: High Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Protection Type
Number of Poles: 8

###

Samples:
US$ 162/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

model Number of poles Phase Rated voltage Rated speed Continuous locked-rotor torque Rated torque Rated power Peak torque
Units     VDC RPM N.m N.m W N.m
42BYA075B030C-02 4 3 24 3000 0.192 0.16 50 0.48

###

model Peak current Torque constant Back EMF Motor length Motor length voltage range Range of rotation weight
Units A Nm/A V/KRPM g.cMoment of inertia mm VDC RPM Kg
42BYA075B030C-02 9.6 0.05 3.947 14.6 134 24~48 1000~3000 1.0 

/ Piece
|
50 Pieces

(Min. Order)

###

Application: Industrial
Speed: High Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Protection Type
Number of Poles: 8

###

Samples:
US$ 162/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

model Number of poles Phase Rated voltage Rated speed Continuous locked-rotor torque Rated torque Rated power Peak torque
Units     VDC RPM N.m N.m W N.m
42BYA075B030C-02 4 3 24 3000 0.192 0.16 50 0.48

###

model Peak current Torque constant Back EMF Motor length Motor length voltage range Range of rotation weight
Units A Nm/A V/KRPM g.cMoment of inertia mm VDC RPM Kg
42BYA075B030C-02 9.6 0.05 3.947 14.6 134 24~48 1000~3000 1.0 

Dynamic Modeling of a Planetary Motor

A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

planetary gear system

A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
Motor

planetary gear train

To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

planetary gear train with fixed carrier train ratio

The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
Motor

planetary gear train with zero helix angle

The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

planetary gear train with spur gears

A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
Motor

planetary gear train with helical gears

A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

China High Power Electric Car Brushless DC Planetary Gear Servo Motor for Long Life High Power Pump Fan Chain Grinder     brushless motor	China High Power Electric Car Brushless DC Planetary Gear Servo Motor for Long Life High Power Pump Fan Chain Grinder     brushless motor
editor by CX 2023-03-31

China Standard Semi automatic blowing machine oven motor with gear box for preform holder turning chain with Best Sales

Warranty: Other
Model Number: 90YY
name: blowing machine pressure guage

Specification Namemotor with gear boxPhasesingle phaseUsageFor semi automatic blowing machine oven Why Choose Us Specialist on Blowing Machine and Spare Parts; Pursuit the Ultimate After Sales. 1. More than 15 years’ professional experience in blow molding machine field. 2. Fast delivery: Reply the mail and take action in 24 hour. Plenty of Stocks: Most spare parts have stock and delivery soon.3. Technical support: Our factory have professional team that will help you to find proper spare parts and help to improve your machine performance.4. Competitive factory price: We sell thousands of blowing machine spare parts each each and can also give you wholesaler price.5. One stop service: You can choose all the spare parts for your blowing machine. Save your time and labor cost.6. After sales service: After spare parts arrive your factory, we can also provide on line technical service during the assembling. Please send us your spare parts picture that we can quote! More Product We Manufacture semi automatic blow molding machine, automatic blow molding machine and electrical blowing machine . It is applicable for all shapes of drinking water bottles, such as for drinking water, carbonated soft drink, edible oil, milk, cosmetics packaging, pharmaceuticals, etc. We can provide various spare parts for blowing machine and injection machine. Such as PLC micro computer with different brand; high pressure and lower pressure solenoid valve; Inverter; seals,teflon, liner transducer, lamp, hopper magnet and so on. Packing & Delivery PLENTY OF STOCKS; FAST DELIVERY!

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China Standard Semi automatic blowing machine oven motor with gear box for preform holder turning chain  with Best SalesChina Standard Semi automatic blowing machine oven motor with gear box for preform holder turning chain  with Best Sales

China Chain and sprocket factory : (3″4″6″Carrier blockchain systems engineering in Daegu Republic of Korea for Overhead Conveyor System with ce certificate top quality low price

We – EPG Group the most significant Chain and agricultural gearbox factory in China with 5 various branches. For far more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

Our AdvantagesProducts Large quantity in Inventory, No MOQ necessary We comply with all the global specifications, such as ISO9001 and TS16949 requirements.industrial we offer chromed bar and tubes for hydualic and pheumatic cylinders, pto shaft, agricultural gearboxes etc. factors such as roller chains. Roller chains are accessible in common, nickel plated & stainless steel materials in pitch dia. ranging from 1/4 in. to 3 in. Sorts include leaf chains in lacing configurations ranging from 2 x 2 to 8 x 8. Leaf chains are accessible in pitch measurements ranging from 1/2 in. to 2 in., pin dia. ranging from .156 in. to .687 in. & tensile strengths ranging from 4,000 lbs. to 156,000 lbs. Purposes incorporate agricultural, conveyors, drilling, electronics assembly, foods processing, fork lift vehicles, hoists, packaging & textile machinery. We assist a nationwide base of Industrial Distributors, and First Products Manufacturers as nicely as Agricultural Products Makers and Wholesalers. Positioned in Memphis, TN we are at the centre of one particular of the premier distribution hubs in the country and with our in depth stock levels and endless delivery options, we are in a position to supply our clients with precise on-time deliveries. We specialize in the chains created to customers’ drawings and specification. Our edge is dependable quality, aggressive price, prompt shipping and great services.

StHangZhourd products include numerous transmission and conveyor chains, like Roller Chain, double pitch EPT Chain, Hollow Pin Chain, Leaf Chain, Desk Prime Chain, Aspect Bow Chain, Lumber Chain, EPT Chain, Silent Chain, PIV Chain, Stainless Metal Chain, Nickel/ Zinc plated Chain, Dacromet Chain, EPT Chain, Metal Pintle Chain, Welded steel chain, Forged chain, Malleable Iron chain, and numerous EPT sorts. Diverse types of attachment are offered.

Product Description
Requirements:
one) Attachments on 1 aspect
two) Attachments on interior plates
3) Attachments on outer plates
four) Attachments on equally sides
5) Straight attachments
6) Crank attachments
7) Pin attachments
eight) EPT unique attachments
Transmission chain is renowned for its large energy and steady antifatigue The chain dimensions fully meet up with the stHangZhourds of ANSI and BS.
According to diverse functioning situations, it could pick the chain with distinct coating treatment method, this kind of as zinc plating, nickel plating, chromeplating and dacromet plating ec

Solution Description

twenty five-1 to 240-one
25-2 to 240-two
25-3 to 240-three
04BB-1 to 72B-one
04B-2 to 72B-two
04B-3 to 72B-three

We supply assorted varieties of roller chains, conveyor chains, transmission chains and agricultural chains and so on. In accordance drawings.

Functions:
1) A series chains:
A) Simplex: twenty five-1 – 240-1
B) Duplex: 25-2 – 240-2
C) Triplex: 25-3 – 240-3
two) B sequence chains:
A) Simplex: 04B-1 – 72B-1
B) Duplex: 05B-2 – 72B-two
C) Triplex: 05B-3 – 72B-3
3) Materials: Stainless metal or carbon metal

four) EPT chains obtainable: Hefty-duty series roller chains, cottered sort quick pitch precision roller chains (A series), weighty obligation series cottered sort roller chains, EPT simplex roller chains, zinc plated chains, dacromet plated chains, nickel plated chains, anti-facet bow chains, side bow chains for pushing windows, aspect bow chains, aspect bow chains, self-lubrication roller chains, silent chains, self-tooth forming chains (P. I. V. Chains), weighty-responsibility cranked-url transmission chains, steel chains for sewage disposal, oil discipline chains, coupling chains, motorcycle chains, O-ring motorbike chains, engine system chain (timing chains), double pitch transmission chains and double pitch transmission chain attachments.

The use of first gear manufacturer’s (OEM) component quantities or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our company and the shown replacement components contained herein are not sponsored, accepted, or manufactured by the OEM.

China Chain and sprocket factory : ISO pitch chain for chainsaw China in Herat Afghanistan Standard Rubber Roller Chain with ce certificate top quality low price

China Chain and sprocket factory : ISO pitch chain for chainsaw China in Herat Afghanistan  Standard Rubber Roller Chain with ce certificate top quality low price

We – EPG Team the largest Chain and agricultural gearbox manufacturing unit in China with 5 diverse branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

The team is centered on producing all range of common roller chains and sprockets, gears & gearboxes, this kind of as conveyor chain & sprockets , stainless steel chain, agricultural chain and has not just sold its goods all in excess of china, but also marketed a lot more than sixty five% goods to oversees, such as Europe, The us, South-east Asia, and it also has established up storage logistics in places like Europe. ISO Keeping in head that good support is the crucial to cooperating with consumers, we attempt to meet higher quality expectations, provide aggressive charges and guarantee prompt shipping. 9001:2000 licensed. Stocking distributor of electricity transmission goods like roller & several strand roller chains. Goods also consist of brakes, drive factors, gears, torque limiters, U-joints, pulleys, sheaves, encoders, belt drives, clutches & motors are also offered. guidance essential. ISO StHangZhourd Rubber Roller Chain

one. Chain Substance: Alloy metal & Stainless metal
two. Rubber Materials: NBR & NR & PUR
three. Rubber hardness: Shore hardness 65-75, 75-eighty five, 85-ninety five
four. Chain Area Treatment method: Shot peening & Blackening & Bluing
five. Chain Measurement:
08B-G1 08B-G2, 10B-G1 10B-G2, 12B-G1, 12B-G2, 16B-G1 16B-G2, 20B-G1, 20B-G2 24B-G1
 

Product name  ISO StHangZhourd Rubber Roller Chain
Materials Available  one. Stainless Steel: SS304, SS316, and many others
2. Alloy Metal: 45Mn, 42CrMo, 20CrMo, and so on
3. Appurtenant material: NR, NBR      
four. OEM according to your request
Floor Treatment method Shot peening, Blackening, Oxygenation, Sharpening, Zinc-plated, Nickel-plated, Anodized, and many others.
Attribute Fire Resistant, Oil Resistant, Heat Resistant
Layout criterion ISO DIN ANSI & Customer’s Drawing
Size Customer’s Drawing & ISO StHangZhourd 
Software Wood solution factory, plywood factory
Bundle Wooden Situation / Container and pallet, or created-to-buy
Certificate ISO9001: 2008 
Advantage Fir EPT high quality, Be EPT service, Aggressive value, Fa EPT delivery
Supply Time 20 days for samples. 45 days for official order.

Technique Parameter:

Workshop

StHangZhourd products consist of a variety of transmission and conveyor chains, like Roller Chain, Double Pitch EPT Chain, Hollow Pin Chain, Leaf Chain, Desk Prime Chain, Aspect Bow Chain, Lumber Chain, EPT Chain, Silent Chain, PIV Chain, Stainless Steel Chain, Nickel / Zinc-Plated Chain, Dacromet Chain, EPT Chain, Steel Pintle Chain, Welded Steel Chain, Forged Chain, Malleable Iron Chain, and a lot of EPT sorts. Various varieties of attachments are offered.

Our services : The lowest prices and best quality to customer satisfaction, we look forward to your calls and long-term cooperation. 

If you have any dilemma, you should really feel cost-free to speak to us.

The use of authentic gear manufacturer’s (OEM) portion quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our firm and the listed substitute areas contained herein are not sponsored, accredited, or made by the OEM.

China Chain and sprocket factory : ISO pitch chain for chainsaw China in Herat Afghanistan  Standard Rubber Roller Chain with ce certificate top quality low price

China Chain and sprocket factory : ISO pitch chain for chainsaw China in Herat Afghanistan  Standard Rubber Roller Chain with ce certificate top quality low price

China Chain and sprocket factory : ISO pitch chain for chainsaw China in Herat Afghanistan  Standard Rubber Roller Chain with ce certificate top quality low price

China Chain and sprocket factory : ISO pitch chain for chainsaw China in Herat Afghanistan  Standard Rubber Roller Chain with ce certificate top quality low price

China Roller chain and sprocket manufacturer Side yamaha blaster 200 chain roller China in Porto Alegre Brazil Sealing Film Heat Shrink Machine for Shampoo Bottle with ce certificate top quality low price

China Roller chain and sprocket manufacturer Side yamaha blaster 200 chain roller China in Porto Alegre Brazil  Sealing Film Heat Shrink Machine for Shampoo Bottle with ce certificate top quality low price

We – EPG Group the largest Chain and agricultural gearbox manufacturing unit in China with 5 various branches.

Our company pays certain consideration to customers’ wants, listening to the particular requirements of every client and guaranteeing whole gratification.Roller our products are selling properly in the American, European, South American and Asian marketplaces. a specialised supplier of a total range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….Chain ANSI Normal • British Regular • Weighty-Responsibility • Intense-Obligation • Super Large Sequence • Cottered or Riveted • Numerous Strand • Stainless Steel • Nickel Plated • Dacroclad™ • Prolonged Pitch (Which includes Big Roller) • 81X, 81XH, 81XHH • Hollow Pin • Agricultural (CA550, CA620, and many others.) • Citrus Chain ISO 9001, ISO/TS 16949 and AS9100 qualified. Producer of standard and custom made roller chains for use in a broad variety of purposes. Roller chains are available in single-pitch, double-pitch and precision types. Fulfills or exceed ANSI requirements. Description:
Beautiful equipment, Steady top quality, Safety,vitality preserving, patented goods, domestic initiative, application to the POF PVC PP movie  thermal shrink packaging effect is perfect.
Functions:
one.Physical appearance and knot design and style in accordance with countrywide stHangZhourds, the fuselage employs fingerprint resistant sheet creation following spray treatment.
2.Management panel employing programming technique, 12V DC input , button switch , electronic show. 
three.  Transmission making use of 24v DC Motor velocity manage making use of variable frequency technologies -9 file adjustment.
four.The conveyor belt can be utilized wire mesh belt, chain roller, Teflon mesh belt a few. 
5.Heating using 600W 220V considerably infrared quartz heating tube. 
six.Temperature handle making use of substantial precision intelligent temperature control system . up and down temperature unbiased regulation. 
7.Very hot air circulation making use of 220V 60W 2200 to the extended axis motor with wind wheel. 
8.The bracket can be disassembled , and the top of the bracket can be altered. 

L SEALER FQL 450 A SHRINK TUNNEL BSN 4571C
VOLTAGE 220/fifty-60HZ VOLTAGE 380v 50-60HZ
Electrical power 1.35KW Energy 9KW
AIR Force: five-seven TUNNEL Size(L*W*H) 1200*400x200mm
Ability fifteen-30bags/min Item Dimension(W*H) 350x150mm
Merchandise MAX SIZE  L+H(H<150mm) <500mm EPT Speed -15m/min
Product MAX Dimensions W+H(H<150mm) < 400mm Materials CHAIN, TEFLON
SEALING Measurement 550*450mm CONVEYING LOAD 20kg max
Device Size (L*W*H) 1650*800*1450mm Device Dimensions (L*W*H) 1600x560x660mm
Bodyweight 300KG Fat 80kg 
Software: POF.PE, Software: PE.POF

 

The use of original gear manufacturer’s (OEM) portion numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our firm and the shown alternative components contained herein are not sponsored, authorized, or manufactured by the OEM.

China Roller chain and sprocket manufacturer Side yamaha blaster 200 chain roller China in Porto Alegre Brazil  Sealing Film Heat Shrink Machine for Shampoo Bottle with ce certificate top quality low price

China Roller chain and sprocket manufacturer Side yamaha blaster 200 chain roller China in Porto Alegre Brazil  Sealing Film Heat Shrink Machine for Shampoo Bottle with ce certificate top quality low price

China Roller chain and sprocket manufacturer Side yamaha blaster 200 chain roller China in Porto Alegre Brazil  Sealing Film Heat Shrink Machine for Shampoo Bottle with ce certificate top quality low price

China Roller chain and sprocket manufacturer Side yamaha blaster 200 chain roller China in Porto Alegre Brazil  Sealing Film Heat Shrink Machine for Shampoo Bottle with ce certificate top quality low price

China Sprocket & Chain # 110A8 Sprocket Number 110 With High Quality Cheap sales price cost near me shop Custom roller size allowed

China Sprocket & Chain # 110A8  Sprocket Number 110 With High Quality Cheap sales price cost near me shop Custom roller size allowed

If you are interested in any of our products or would like to discuss a potential order, please feel free to contact us. EPG is famous and biggest Chains and Sprocket manufacturer and exporter in China.

Our on line page is just for ref.. For more details pelase contact us at: wechat/whatsapp/mobile: +86-13083988828

All engineering class chains & precision roller chains. Single strand chain, multi-strand chains, double pitch chains, corrosion resistant chains, self-lubricating chains, attachment chains, leaf chains, and specialty chains.dimensions are nominal values and for reference only

Unit of Measure

Imperial
Metric
Both

Specifications

Pitch



6.000 in

Plate Thickness



1.750 in

Barrel Diameter



1.250 in

No. Teeth



8

Stock Bore



1.500 in

Approx. Weight



96.000 lb

Style



Type A

Use



For EPT Chain Numbers 110, C-110

China Sprocket & Chain # 110A8  Sprocket Number 110 With High Quality Cheap sales price cost near me shop Custom roller size allowed

China Sprocket & Chain # 110A8  Sprocket Number 110 With High Quality Cheap sales price cost near me shop Custom roller size allowed

China Sprocket & Chain # 110A8  Sprocket Number 110 With High Quality Cheap sales price cost near me shop Custom roller size allowed

China Chain and sprocket factory : Retailing zillow China in Pereira Colombia Store Wooden Single Sided Vegetable and Fruit Display Shelf with ce certificate top quality low price

China Chain and sprocket factory : Retailing zillow China in Pereira Colombia  Store Wooden Single Sided Vegetable and Fruit Display Shelf with ce certificate top quality low price

We – EPG Group the biggest Chain and agricultural gearbox factory in China with 5 diverse branches. For much more details: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

High quality and credit are the bases that make a company alive. a specialised provider of a total assortment of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….Our we have received the believe in of consumers throughout the world. a specialised supplier of a complete variety of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….capabilities go far past the scope of our catalog. Based mostly on consumer need, we now stock solid collars with outsized bores for programs in which the normal tolerance does not let for adequate clearance. We also give various finishes for reliable and split collar including yellow zinc, nickel and chrome. A lot of are even stocked for off-the-shelf supply. We also manufacture and stock reliable collars with 2 established screws, with via holes, and with out holes. Collars are available in inch and metric sizes. Heavy collection clamp-kind collars and threaded collars are also offered. We can even offer square bore collars for amount specifications. And if your unique specifications repeat regularly, we are happy to stock elements for scheduled releases. Whatever your collar specifications, Lucas Industrial is your supplier for substantial high quality price – powerful parts. No other selection of chains can beat EPG for variety. In addition to conventional roller chains of all types and sizes, roller chains with attachments and double pitch roller chains, we also supply particular chains these kinds of as grip chains, accumulation chains, elastomeric profile chains, leaf chains, bushed conveyor chains, hollow pin chains and several other types. Upkeep-free of charge or corrosion-proof chains are accessible for particular purposes. Our pin oven chains and tube conveyor chains allow a broad assortment of remedies for the effective creation and the best possible conveying of cans and tubes. Discover out more about our merchandise
Retailing keep steel single sided vegetable gondola rack
Large-duty Storage shelving rack construction is assembled, so the top is adjustable, and the section is sophisticated designed.
At the same time, it is the mo EPT typical way of storing due to the fact of its effortless obtain and load capability with all kinds of stacking equipments.
one. Comprehensive set up strategy of storage
2. Logistics direct and demand of storage area
three. Product and data of using forkman
four. Increasing peak of forkman and offered web height of storage
5. Pallet dimension, Fork obtain path and products excess weight on the pallet.

Attributes:
one. The heavy-duty storage shelf, manufactured of large-grade steel, with static spray end, is sound in design and anti-ru EPT in apperance. Pallet roller rack
two. It is simple to assemble and dismantle, extensively employed in warehouse for products storage.
3. The rack is linked with the plates and angle metal via the pins and special screws.
four. Cabinets of the rack can be adjustable freely. Pallet rack producers
five. Layer boards can be metal panel or picket panel. Steel pallet rack
six. This rack is excellent for pallet racking with forklift, is mo EPT well-known amongst buyers for warehouse storage, many thanks to its sturdy construction and hefty-obligation potential. Pallet rack companies
7. Different coloration, dimensions, levels, and thickness of materials are available. Large responsibility rack storage shelf. Pallet roller rack

Benefits of our weighty obligation rack:
1. Each and every pallet could be set in or moved independently without having disturbing any EPT pallet.
2. Able to adapt to shelves of a variety of types. Support bar for pallet rack
three. Beam peak could be altered in accordance to sizes of items. Stainless metal pallet rack
four. Ensuring excellent merchandise turnover and fa EPT loading and unloading. Upright beam of metal pallet rack
5. Equipment are the easy EPT at the lowe EPT fees which could be swiftly installed and dismantled.
6. In a position to adapt to multiple types of transport machines and architectural constructions and flooring
7. In a position to avoid decline of items because of to shelf power and rigidity. Cold storage pallet rack
8. Capable to utilize higher place of warehouse as considerably as feasible. Gravity roller pallet rack.

Content higher good quality cold rolled metal
Size 2500x1000x3000mm
upright 70x90x(1.8-2.5)mm

60x80x(1.5-2.)mm

pipe 50x(80-160)x(1.5-2.)mm
Floor treatment method plastic powder coating
colour custom’s require accessible in accordance to Pantone color
Features -easy to put in and dismantle

-support ahead of and after sale

-large top quality merchandise and examining very carefully before shipping and delivery

-expert and in time supply

package deal different packed,the truss,the cabinets and upright posts wrapped with bubble film for prolonged length transportation.

 

The use of first products manufacturer’s (OEM) part numbers or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our company and the shown alternative areas contained herein are not sponsored, accepted, or created by the OEM.

China Chain and sprocket factory : Retailing zillow China in Pereira Colombia  Store Wooden Single Sided Vegetable and Fruit Display Shelf with ce certificate top quality low price

China Chain and sprocket factory : Retailing zillow China in Pereira Colombia  Store Wooden Single Sided Vegetable and Fruit Display Shelf with ce certificate top quality low price

China Chain and sprocket factory : Retailing zillow China in Pereira Colombia  Store Wooden Single Sided Vegetable and Fruit Display Shelf with ce certificate top quality low price

China Chain and sprocket factory : Retailing zillow China in Pereira Colombia  Store Wooden Single Sided Vegetable and Fruit Display Shelf with ce certificate top quality low price